This page contains affiliate links. We may earn commissions when readers interact with or purchase items through these links. For more information, see our affiliate disclosures here.
Hershey brought a new product to stores in September. It is a small treasure chest type box that has 4 Hershey Kisses and 1 Transformers toy. These are out now and you can get them at Walmart or Menards, which is where xRotorstormx found hers. The toys inside are about an inch tall and you can get Optimus, Bumblebee, Grimlock, Starscream or Megatron. Below you can see the three autobots.
This mission is taking Transformers where they've never gone before! Every HERSHEY’S KISSES Transformers Milk Chocolate Treasure Surprise comes with a collectible toy. Play time just got even sweeter with a brand-new buddy for exploring your imagination. Unbox delicious, creamy milk chocolate, unbox fun.
Thanks to Seibertronian Tuned Agent, we have a great new review to bring to you! Regular YouTube reviewer TonTon brings us an excellent look at the upcoming Movie Masterpiece MP-11 Ratchet! We get some very good look at the details on Ratchet in both robot and especially his Hummer altmode. There are some good size comparisons with his Studio Series figure, as well as a great shot of Ratchet with the other '07 movie Autobots.
And without further ado, the review!
Ratchet is due out October 1st in the U.S., where he's a Target store exclusive, and is still available for preorder on Target's website. Are you looking forward to this figure? Let us know what you think below!
Date: Friday, August 28th 2020 5:46am CDT Category:Collectables Posted by:ZeroWolf | Credit(s): -WonkoTheSane- from Seibertron, AzureSea Studios social media accounts
Greetings Seibertronians! Fellow Seibertron user, -WonkoTheSane- has let us know that AzureSea Studios have revealed their next statue in their range of officially licensed Transformers products. The statue is of Tarn! Leader of the Decepticon Justice Division from the first IDW Transformers continuity. There is also an exclusive statue of the "pet" included. There is no price or release date at this time.
As you can see, the statue has a light up gimmick and is only the second officially licensed Tarn representation. Flame Toys produced the very first Tarn statue.
This statue is 75 cm (27.5") tall and appears to have the remains of Kaon scattered around, referencing the "Dying of the Light" Arc in the Transformers More Than Meets The Eye Comic series by IDW.
The news was also shsred on Chinese Social Media site, Weibo.
What do you think of this statue? Let us know in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews!
Mighty Jaxx had given us a Soundwave bust featuring him all blinged out and being a DJ. And now we get a new bust from them for Optimus Prime, which they recently revealed on Facebook. Unlike Soundwave, Optimus here looks very different from his G1 self. This is because it comes from designer Clogtwo who lends it his iconic Mechasoul style. This is where the innards of a famous character are revealed to be machine. But in Optimus's case, this is already the case. It is available for preorder now at www.mightyjaxx.com for the price of $359 (shipping included).
Greetings Seibertronians! Fellow Seibertron user, Thundertron, has let us know that a new preorder has appeared on Hasbro Pulse. The preorder is for ThreeZero's DLX Siege Megatron!
This premium action figure is the companion piece to the companys already revealed DLX Siege Optimus Prime figure. Megatron comes with a plethora of accessories, including the pieces to make his sword and multiple different hands.
Megatron is due for release on the 31st March, 2021
Check out the link to place your order, and have a look at the gallery of images mirrored below:
What do you think of this high end action figure? Let us know in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews!
Thanks to transformers_va, one of our own fellow Seibertronians, we've been directed to Hasbro Pulse, and their latest update on War for Cybertron Unicron!
Transformers fans! We’re excited to bring you an exclusive, behind-the-scenes look at packaging and instructions development for Unicron!
We're treated first to a closer look at the packaging and an unboxing video for the Chaos Bringer, showing us just how he'll look when he arrives at the doors of those who backed him via the crowdfunding effort late last year.
We then are taken through the process of designing the instruction booklet for Unicron, which is a whopping 32 pages long! Mark, a Senior Graphic Designer for the project, goes into the details of how instructions are made, and his process of working with the prototype at home to develop the instructions.
Q: Can you walk us through the typical Transformers instructions process?
A: Our development process actually begins a year before our toys hit in-store retail and “online” shelves. Since the early 1980s, Hasbro has partnered with Takara Tomy, located in Japan, for the development of the Transformers brand’s toys. This all starts with “TT,” as we call them, providing us with reference CADD images or videos, called photosteps, that show how to convert each Transformers figure. From there, I review each conversion assembly, step-by-step, marking-up TT’s photo steps with my own comments and recommendations for improvement that will make the most sense for our consumer.
If you needed further proof of the size of Unicron's box, the Brand Manager, Rachel, shows that a six foot tall human can easily fit inside.
And finally, the engineer's best assistant, Charlie, shows us that this box is definitely kitty-approved.
You can read the entire post with its informative Q&A, by clicking on any of the above pictures.
Thanks to Hasbro giving us another thorough update on the process of bringing the largest-ever Transformer to life. He's not due out until January 2021, but that's only 5 short months away! Share your thoughts about this latest update below!
Greetings Seibertronians! Fellow Seibertron users, AcademyofDrX, -WonkoTheSane- and Rodimus Knight have let us knkw that Flame Toys have taken to Twitter to show off the updated Windblade design for their Furai model kit range.
Unlike the previous design, this one retains her wings as as seen on all her over appearances, since she first debuted.
What do you think of this update? Will you be getting her to add to your Transformers model collection? Let us know in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews.
Well, for those who like G1 and Funko Pops, this could make you happy. These new Transformers Pops were revealed as part on Instagram along with others, like the Monopoly man and Furby. The ones shown are Optimus Prime and Bumblebee but the deal here is that they are a combo of different G1 aspects. The heads come from the cartoon (Bumblebee has a mouth for instance) while the bodies are based on the G1 toys.
Check them out below and let us know if this mishmash interests you or if you were going to buy them regardless or not buy them no matter how they looked.
Greetings Seibertronians! Fellow Seibertron user, -WonkoTheSane-, has let us know that Flame Toys have unleashed a new of reveals following on from yesterday! These include new sketches of forthcoming products in their Kuro Kara Kuri line and a fulfilment of a promise made yesterday, full colour pictures of Kuro Kara Kuri Victory Saber!
This appears to be an add on set for their already available Kuro Kara Kuri Optimus Prime, giving him a jet pack upgrade like that enjoyed by his live action movie counterpart in the end fight of Revenge of the Fallen.
After first being teased almost two years ago, we finally get our proper look at the Victory Combination in all its glory.
What do you think of these first looks and Victory Saber? Let us know in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews.
Greetings Seibertronians! With SDCC at home roaring into gear, Flame Toys have taken to Twitter to reveal several figures, including one fans of Star Saber have been waiting a while for!
Primal will be the first to represent Beast Wars in Flame Toys Furai Action range. According to their tweets, releases will feature die-cast, high articulation and be fully painted non-transforming figures.
According to a tweet by famed animation studio Trigger, Primal was designed by Satoshi
Amemiya, one of the staff at Trigger.
Leo Prime is to be the second release of the Furai Action line, and Studio Trigger have revealed he was designed by their staff member, Masaru
Sakamoto.
What do you think of these new releases? Want to see Victory Saber in all his glory? Let us know in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews.
Goto Page: <<1, 2, 3, 4, 5, 6>> 51 total news articles in this section, 10 per page.
* Price and quantities subject to change. Shipping costs, taxes and other fees not included in cost shown. Refer to listing for current price and availability.
![[Valid RSS]](/images/rss/valid-rss.png "Validate Seibertron.com's RSS feed"){kind=small}
